JL Audio HO110RG-W3v3 W3v3 Single 10" 500W RMS (1000W Peak Power Handling) W3v3 Subwoofer with Ported H.O. Wedge Enclosure
We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" W3v3 Single Subwoofer with Ported H.O. Wedge Enclosure
- • Ported high output enclosure containing one subwoofer
- • Owner's Manual
Why Choose JL Audio HO110RG-W3v3 Enclosed Car Subwoofer?
High Output Enclosures
The JL Audio HO110RG-W3v3 is a high-output loaded subwoofer enclosure designed to deliver exceptional bass performance for car audio enthusiasts. This premium enclosure houses a 10-inch W3v3 subwoofer renowned for its powerful and accurate bass reproduction.
The HO110RG-W3v3 features a ported design, allowing the subwoofer to move air efficiently, increasing bass output and overall impact. The enclosure is constructed with top-grade MDF and wrapped in a high-quality carpet finish, ensuring durability and a sleek appearance that seamlessly complements any vehicle interior.
Extensive Real-world Listening
With a power handling capability of up to 500 watts RMS, the HO110RG-W3v3 offers a potent and dynamic bass experience, enriching the low-frequency response of your car audio system. Its compact and slim design allows for versatile installation in various car models and trunk spaces, making it a practical choice for those seeking powerful bass without sacrificing space.
Whether you enjoy heavy-hitting beats or a more refined bass reproduction, the JL Audio HO110RG-W3v3 loaded subwoofer enclosure delivers a well-balanced and immersive bass experience that elevates your car audio system to new levels.
Frequently Asked Questions (FAQ)
- • Why is my sub making a strange crackling or popping noise even at low volume?
This typically indicates mechanical damage to the voice coil or a loose internal component. Because the integrated aluminum grille bars block immediate access, you will need to unscrew and carefully remove those protective bars to pull the woofer out and inspect it.
- • Can I safely match this enclosure with a 600W RMS amplifier?
The enclosure is rated for 500W RMS at 2 ohms. While a 600W amp works, you must set your gains conservatively using a multimeter to avoid clipping, over-excursion, or frying the voice coil.
- • Why does the bass sound muddy and overly "boomy" rather than tight and punchy?
This occurs if your amplifier's "Bass Boost" feature is active or if the low-pass filter (LPF) is set too high. Turn off all bass boost functions completely and tune your LPF to around 80 Hz for clean, precise transients.
- • What is the exact internal wiring configuration of this system?
It comes pre-loaded and pre-wired internally to present a final nominal impedance of 2 ohms at the external 5-way binding posts, optimized to pull maximum power from mono amplifiers.
- • Is this a passive or an active (powered) subwoofer wedge?
It is entirely passive and contains no built-in amplifier. You must purchase and install an external mono or bridgeable amplifier capable of pushing 150W to 500W RMS into a 2-ohm load.
- • Why is the enclosure much wider than other single 10-inch subwoofer boxes?
The 29.5-inch width is necessary to accommodate JL Audio’s patented chamber-coupled slot port, which wraps around the inner walls to maximize bass output and efficiency.
- • Which direction should the slot port face when installing it in a trunk?
The angled-back, rear-firing design is engineered to sit flush against the back of your rear seats. Facing the woofer and slot port toward the rear of the vehicle utilizes the trunk boundary walls to naturally load and amplify the low-end frequencies.
- • Can I swap the pre-installed 2-ohm driver for a 4-ohm driver if my amp isn't 2-ohm stable?
Yes. If your amp is only stable down to 4 ohms, you can unscrew the factory driver and replace it with a standard 4-ohm 10W3v3 subwoofer. The internal box volume and port tuning will still perfectly match the new driver.
Learn how to wire subwoofers

- Diameter : 10 Inch
- Sensitivity : 84 dB
- Impedance : 2 Ohm
- Frequency Response : 25-250 Hz
- Peak Power Handling : 1000 Watts
- Number Of Subwoofers : 1
- Enclosure Type : Ported
- Amplified : No
- RMS Power Handling : 500 Watts
Features:
- Powerful Ported Bass: Ported enclosure with one 10" W3v3 subwoofer delivers deep, punchy low-frequency performance.
- Durable MDF Construction: 5/8" medium-density fiberboard wrapped in gray carpet with black accent insert for strength and style.
- Protective Aluminum Grille: Solid aluminum bars safeguard the subwoofer while maintaining a sleek, premium look.
- Optimized 2-Ohm Impedance: Ensures efficient power transfer and maximum amplifier output.
- Reliable Power Handling: Handles 150–500 watts RMS for strong, distortion-free bass.
- Wide Frequency Response: 25–250 Hz range delivers full-range, deep bass impact.
- High Sensitivity: 85 dB ensures solid output even with moderate amplifier power.
- Compact & Stylish Design: Dimensions of 29-1/2" W x 13-1/4" H x 12" D1 x 7-3/8" D2 for easy integration and a modern aesthetic.
Specification:
- Woofer Size (inches):10
- Speakers Per Box:1
- Woofer Material: Mineral/Poly
- Enclosure Type: Ported
- Color: Gray
- Pieces in System: 1
- Width (inches): 29-1/2
- Height (inches): 13-1/4
- Depth (inches): 12
- Connector Type: 5-way post
- Frequency Response: 25-250 Hz
- Power Range (Watts RMS): 500
- Maximum Wattage: 1000
- Sensitivity: 85 dB
- Impedance: 2 ohms
- UPC: 699440931359
- Weight: 40
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
i have this in the back of my 2000 jeep wrangler and it fits excllent. powered ba a rockford T400-2 in mono@ 522rms watts, it really sounds good, very good choice, and would buy it all over agine
-
I replaced my 2 10 inch 600w rms Audiobahn's in a sealed box with this one 10 inch slot ported HQ JL using exact same amp (Legacy 600w rms x 2 or 1,200w rms x 1)(there are MUCH better amps out there but when I bought it, it was great for the price) and this hits harder and much deeper! It's in the yrunk of my Hyundai XG350L teamed with a pr of Kicker 6x9's and Kicker 6.5 components using an Alpine 100w rms x4 and a Kenwood deck. The sound is fantastic! LOVE this sub! Highly recommend! Can't do much better at this price! Only reason for 9 ratings is because there ARE better subs and enclosures but they cost more $$. Get this you'll love it!
-
I purchase the H.O 10inch subwoofer enclosure . Great sound quality great H.O . It's hook up to my JL Audio RD900/5 . Channel amp ... 500 watts feeds the subwoofer great sound quality .. benefits of a 10inch subwoofer . Clean bass and accurate sound quality ....
-
Looks is really what got me with the sub! Aesthetics is 10/10 for me. I know that JL Audio subs are great with sound quality, so when I tried it, I know already what I’m getting into with the sub. Price wise its expensive but for the quality, its still is a great deal to have in your setup and if you have the money for it